Super Live Plus
SuperLive Plus — Remote View & Smart Alerts for NVR/DVR
See your cameras from anywhere, get instant push alerts, and connect in minutes using QR pairing — no port forwarding.
Scan for iOS
Scan for Android
Swap these placeholders with QR images hosted on usacompua.com.
Why buyers choose SuperLive Plus
- Fast remote view: Live & playback from anywhere — know what’s happening in seconds.
- Smart push alerts: Motion/event notifications so you react sooner and reduce false alarms.
- QR onboarding: Scan, sign in, done — no static IP or DDNS.
- Multi-site ready: Add home, office, warehouse and switch in a tap.
- Safe sharing: Viewer-only logins so you never share your admin password.
Key features & benefits
- Live View & Playback: Confirm events and export clips when needed.
- Push Notifications: Immediate alerts configured per channel.
- Multi-Channel View: Grid view, quick full-screen jump.
- Cloud P2P / QR: Onboard without router changes.
- Multi-device login: Access on multiple phones/tablets.
Quick setup (2–4 minutes)
Connect your NVR/DVR to the internet (P2P status: Online).
Install SuperLive Plus (iOS/Android) using the buttons above.
Add Device → QR Code → scan the sticker/on-screen QR.
Enter the device username & password → Save.
Open Live View and enable Push Notifications if desired.
Best reliability: wired LAN on the recorder + strong Wi-Fi/LTE on your phone.
Compatibility
- Designed for many TVT recorders and select OEM variants sold by USAcompuA.
- Works with most H.264/H.265 NVR/DVR systems supporting SuperLive Plus / P2P QR.
- iOS & Android supported.
Not sure about your model? Share the recorder model and we’ll confirm before install.
What this helps you avoid
- Guessing if everything’s okay — just check instantly.
- Missed events — event-based push alerts keep you informed.
- Complicated networking — QR setup avoids port forwarding.
- Sharing admin credentials — create viewer-level accounts.
FAQ
Do I need to open ports on my router?
Usually no. SuperLive Plus uses cloud P2P with QR pairing, so typical port-forwarding isn’t required.
Why can’t I connect from outside my Wi-Fi?
Confirm recorder shows “Online,” your phone has internet, and the device credentials are correct. A quick reboot of recorder/router often helps.
How do I enable motion alerts?
Turn on motion/smart events per channel on the recorder, then enable push notifications in the app for that device/channel.
Can I add multiple locations?
Yes. Add each recorder via QR. Easily switch between sites inside the app.
Will it work with my camera brand?
Compatibility depends on the recorder. Share your model number and we’ll verify support before installation.
Technical highlights
Platforms
iOS & Android
Video Codecs
H.264 / H.265 (device-dependent)
Views
Single & multi-channel live view, playback, snapshots, export (device-dependent)
Onboarding
Cloud P2P, QR pairing, manual add by serial/IP
Notifications
Push notifications for motion/events (configure per channel)
Need help connecting?
We’ll confirm compatibility, walk you through setup, and tune alerts for fewer false notifications.