Hikvision DS-1280ZJ-DM8 Dome Camera Junction Box – Water-Resistant Aluminum Mount
Hikvision DS-1280ZJ-DM8 Dome Camera Junction Box – Water-Resistant Aluminum Mount
Available in stock (29)
products.product.pickup_availabilities
Description
Description
Hikvision DS-1280ZJ-DM8 / CB130TB Dome Camera Junction Box (White)
A clean camera install isn’t just about the camera—it’s about what’s behind it. The Hikvision CB130TB junction box is designed to give your dome camera a solid, professional foundation while protecting the most vulnerable part of the system: the wiring. By organizing and shielding cable connections, it helps your installation last longer and look better from day one. It’s a small component that quietly solves big installation headaches.
Whether you’re working outdoors or in a demanding commercial environment, this junction box gives you confidence that your camera setup is secure, sealed, and properly supported. The result is fewer callbacks, fewer failures, and a cleaner finish you can be proud of.
Why Buyers Choose This Model
Installers and system owners choose the CB130TB because it simplifies camera mounting while protecting critical connections. Its durable construction and flexible cable routing options make it easier to adapt to real-world installation conditions. Most importantly, it helps extend the life and reliability of the camera system by reducing exposure to moisture and stress at the cable entry points.
Key Features & Buyer Benefits
- Aluminum alloy construction — gives you a sturdy, long-lasting base that stands up to daily wear, so you’re not worrying about cracked or weakened mounts over time.
- Water-resistant design — helps protect cable connections from moisture, reducing the risk of corrosion or signal issues in outdoor installations.
- Side and bottom cable inlets — lets you route cables the way your site requires, saving installation time and avoiding awkward bends or exposed wiring.
- Interchangeable waterproof cover and gland nut — allows you to seal the unused entry point, keeping the install clean and better protected.
- Compact, low-profile form factor — provides enough internal space for cable management without making the camera look bulky or out of place.
What This Helps You Avoid
Without a proper junction box, camera installs often lead to exposed cables, messy mounting points, and moisture creeping into connections over time. That can mean intermittent video issues, premature equipment failure, and repeat service calls that cost you time and money.
The CB130T helps eliminate those problems by giving cables a protected home and enforcing a cleaner mounting structure. Instead of worrying about what’s happening behind the camera, you can trust that everything is sealed, supported, and installed the right way from the start.
Product Support & Shipping Details
Product Support & Shipping Details
We move quickly so you don’t have to wait, place your order before 3pm EST and it ships out the same day, with everything else going out the next business day. Most customers see their package in about 3 business days, giving you a smooth, predictable delivery experience.
For Support you’re never on your own with us. if something comes up, our U.S.-based support team is here to help you troubleshoot, set up, or get answers fast. We make sure you always know exactly what to do next so your product keeps working the way you need it to.
30 Day Returns & Money Back Guarantee
30 Day Returns & Money Back Guarantee
If the product isn’t the right fit, no worries—our 30-day money-back guarantee gives you the space to try it without the pressure. You can return it within 30 days as long as it’s in its original condition. And to keep things simple, you can start the return right from your account, no hassle, no long back-and-forth.
Downloads
Product Manuals, data sheets.
Downloads
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Technical Specifications
Hikvision CB130TB Dome Camera Junction Box (White)
Need a cleaner, more reliable dome-camera install—especially outdoors? The CB130TB gives you a tough, water-resistant mounting base that helps protect cable connections and keeps your setup looking professional. With side and bottom inlets, you can route wiring the way your site demands—so you spend less time “making it work” and more time getting the job done right.
Key Features
- Aluminum alloy with surface spray treatment — built to handle real-world installs and helps resist wear over time.
- Side inlet + bottom inlet — flexible cable routing so you’re not boxed in by the wall/ceiling layout.
- Interchangeable bottom waterproof cover + side gland nut — helps you seal the entry point you’re using, keeping the install tidy and protected.
- Water resistant — better protection for connections in exposed or outdoor environments.
General
```Materials & Finish
```Cable Entry
```Physical
```Installation Notes & Load Capacity
```Available Models
```Accessories Found
- Interchangeable bottom waterproof cover
- Side gland nut
Ideal Applications (Common Uses)
- Outdoor dome camera installs where you want better protection for cable terminations
- Commercial sites needing a cleaner, more “finished” mount (retail, offices, warehouses)
- Locations where cable routing flexibility matters (side entry vs. bottom entry)
- Retrofits where you want to hide/organize connections without redoing the whole surface
Downloads
Frequently Asked Questions
The CB130TB is designed as a junction box specifically for dome cameras. According to the datasheet, it provides a dedicated mounting base that allows cable connections to be routed and protected inside the box. This helps create a cleaner installation by hiding wiring and reducing exposure to environmental factors. It is intended to support professional dome camera installations on flat surfaces.
Yes, the datasheet states that the CB130TB is water resistant, making it suitable for outdoor use. It also specifies that a waterproof rubber gasket should be used for outdoor applications. This helps protect cable entry points from moisture when installed correctly. Proper sealing is important to maintain water resistance in exposed environments.
The junction box is constructed from aluminum alloy, as listed in the datasheet. It also features a surface spray treatment, which contributes to durability and resistance to wear. This material choice makes the unit suitable for both indoor and outdoor environments. Aluminum alloy also helps keep the unit lightweight while remaining sturdy.
The CB130TB supports both side inlet and bottom inlet cable routing. The datasheet notes that the bottom waterproof cover and side gland nut are interchangeable. This allows installers to choose the most convenient cable entry point based on the installation surface. The design provides flexibility without requiring modifications to the junction box.
The datasheet lists the dimensions as Φ126.7 mm × 35 mm (4.99 inches × 1.38 inches). These compact dimensions make the junction box suitable for dome camera installations where space is limited. Despite its low profile, it still provides enough internal room for cable management. This helps maintain a neat and professional appearance after installation.
The CB130TB has an approximate weight of 210 grams, which is about 0.46 pounds. This lightweight design makes handling and installation easier for technicians. At the same time, the aluminum alloy construction ensures the unit remains durable. The low weight also helps reduce stress on mounting surfaces.
The datasheet specifies a maximum bracket load capacity of 1 kg (2.2 lb). It also states that the wall or mounting surface must be able to support at least three times the total weight of the camera and bracket. This guidance is important for safe and secure installation. Following these recommendations helps prevent installation failures over time.
According to the datasheet, the CB130TB should be installed on a flat surface. A flat mounting area ensures proper alignment and sealing of the junction box. This is especially important for maintaining water resistance in outdoor installations. Uneven surfaces could compromise both stability and sealing.
The datasheet lists two available models: CB130T in Hikvision white and CB130TB in black. The CB130TB specifically refers to the black version. These options allow installers to better match the junction box with the camera or mounting surface. Color matching can help the installation blend into its environment.
Recently viewed products
Buyer Before & After Protection
All orders are protected, in case your item gets lost, delayed or arrives damaged. We'll make it right, zero out of pocket cost.
Get advanced protection, and even faster delivery in case of an emergency if you use Shop Pay or Paypal at checkout.
Trusted and Tested Products
Every product we've added to our catalog has been thoroughly tested for reliability, durability, and real-world performance, so you’re not gambling with your safety.
In order for a product to be added it has to pass: Environmental Testing (Heat and Cold), Tamper Resistance, and for advanced systems 99% Alert Accuracy.
Secure Payment
Shop with confidence knowing your payments are secure and your information
