The datasheet states that this NVR supports up to 4 IP camera inputs. That makes it a practical choice for smaller properties, offices, storefronts, and homes that want a dedicated recorder without stepping into a much larger system. It also includes 4 independent PoE network interfaces, which means the unit is built to connect and power up to four compatible cameras directly. For buyers, that usually translates into a cleaner installation and a more straightforward path to getting the system up and running.

Yes, the datasheet shows support for recording resolutions up to 8 MP, and it lists the HDMI output as supporting 4K (4096 × 2160) at 30 Hz and 4K (3840 × 2160) at 30 Hz. That matters because buyers often want to know whether the recorder can keep pace with higher-resolution cameras and a 4K monitor. The decoding section also states 1-ch@8 MP (30 fps), which confirms the unit is designed to handle an 8 MP stream within its decoding limits. In real use, that gives buyers confidence that the recorder can support sharp, detailed video for important scenes.

The datasheet says this model includes 4-ch RJ-45 10/100 Mbps self-adaptive Ethernet interfaces for PoE, and it lists the PoE standard as IEEE 802.3 af/at. That means the NVR has built-in PoE ports designed to connect and power compatible cameras directly. For many buyers, this is one of the biggest convenience features because it can reduce extra hardware and simplify installation. It helps keep the setup cleaner and more plug-and-play, especially on smaller systems.

According to the datasheet, the recorder has 1 SATA interface and supports up to 8 TB capacity for each disk. That means this model is designed for a single internal hard drive, rather than multiple drive bays found on larger recorders. Buyers usually ask this because storage directly affects how long footage can be kept before it is overwritten. The inclusion of H.265+ is also important here, because the datasheet says it can reduce storage space by up to 75%, helping the available drive space go further.

Yes. The datasheet specifically lists Hik-Connect for easy network management, and it also includes network protocols such as TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, HTTP, and HTTPS. That tells you the unit is designed with remote and network-based access in mind. It also lists 32 remote connections, which gives buyers a clearer picture of how the recorder is intended to be accessed across a network. For users who do not want to be tied to the recorder locally all the time, that is a meaningful advantage.

The datasheet lists 1-ch Motion Detection 2.0 with human/vehicle analysis. It also says the recorder supports multiple VCA (Video Content Analytics) events and configurable special camera smart functions such as motion, line crossing, and intrusion. Buyers often ask this because they want to know whether the recorder can help narrow attention toward more meaningful events instead of only doing basic recording. Based on the datasheet, this model does support smart-event functions, but the exact scope depends on channel and compatible camera features.

The datasheet states that the unit supports 4-ch synchronous playback. It also lists decoding capability as 1-ch@8 MP (30 fps) / 3-ch@4 MP (30 fps) / 6-ch@1080p (30 fps), with a note that the length or width of each camera resolution track cannot exceed 4096 pixels. This is useful because buyers often want to know whether playback will feel limited when reviewing multiple views. In practical terms, the unit is designed for smaller surveillance systems while still offering solid decoding performance for common high-resolution playback scenarios.

The datasheet lists support for H.265+/H.265/H.264+/H.264 decoding formats. For recording resolution, it supports 8 MP, 6 MP, 5 MP, 4 MP, 3 MP, 1080p, UXGA, 720p, VGA, 4CIF, DCIF, 2CIF, CIF, and QCIF. Buyers usually ask this when they are trying to match the recorder to existing or planned IP cameras. The range shown in the datasheet gives good flexibility for both higher-resolution cameras and more standard mainstream resolutions.

The datasheet says the recorder provides simultaneous HDMI and VGA outputs. The HDMI output supports resolutions up to 4K, while the VGA output supports up to 1920 × 1080 at 60 Hz. This matters because some buyers still use VGA monitors in older setups, while others want to connect to a newer HDMI display. Having both outputs available makes the recorder easier to integrate into different environments without extra adapters.

According to the datasheet, the recorder measures 320 × 240 × 48 mm and weighs ≤ 1.18 kg (without HDD, 2.6 lb.). It uses a 48 VDC, 1.35 A power supply, and the datasheet lists base consumption as ≤ 10 W (without HDD and PoE off). Buyers often ask this before installation so they can plan shelf space, cabinet placement, shipping expectations, and power needs. Those details make it easier to understand the physical footprint before the unit arrives.