The camera has a maximum resolution of 5120 × 1440. Hikvision identifies it as an 8 MP panoramic fixed bullet network camera, designed to present a wide scene in one stitched image. That matters if you want broad-area coverage without having to install multiple separate cameras for the same view. The datasheet also shows the main stream can run up to 20 fps at 5120 × 1440 when WDR is off, which helps keep motion looking smoother in normal conditions.

This model uses dual 4 mm fixed lenses and provides a 180° horizontal field of view with a 44° vertical field of view. In practical terms, that gives you one panoramic image that can cover a much wider area than a standard single-lens bullet camera. That is especially useful for parking lots, building fronts, loading areas, and long exterior walls where blind spots can become expensive. The datasheet also states the camera is meant to present all covered scenes in one image, which reinforces that wide-coverage design.

Yes. The datasheet highlights Hikvision ColorVu technology for 24/7 colorful imaging, and it uses an F1.0 aperture plus white supplemental lighting to improve low-light performance. Minimum illumination is listed as 0.0005 Lux in color at F1.0 with AGC on, and 0 Lux with the light enabled. For a buyer, that means you are not limited to black-and-white night footage when color detail could make a difference.

The camera uses white supplemental light with a range of up to 40 meters. It also supports smart supplemental light, which helps it work more effectively in darker scenes. That matters because broader light coverage can improve usable color image quality across a larger monitored area instead of only close to the camera. If you are planning for outdoor perimeters or larger drive-up areas, that 40 m range is one of the key practical specs to review.

Yes. The datasheet confirms a built-in microphone and a built-in speaker, and it also lists mono sound with multiple audio compression formats including G.711, G.722.1, G.726, MP2L2, PCM, MP3, and AAC-LC. The built-in speaker is rated with max. power consumption of 1 W and maximum sound pressure of 97 dB at 10 cm. This matters if you want recorded audio, audio warning capability, or a more active security presence without adding separate audio hardware.

Yes. The datasheet specifically says it has an active strobe light and audio alarm to warn intruders off. It also lists flashing light support, audible alarm output, and alarm input/output among its events and interfaces. For a buyer, this matters because the camera can do more than just record an incident; it can help discourage unwanted activity while it is happening. That can be valuable for entrances, fenced areas, service yards, and after-hours business locations.

The camera supports deep-learning-based human and vehicle classification. Under perimeter protection, the datasheet lists line crossing, intrusion, region entrance, and region exiting, and those alarms can be triggered by specified target types such as humans and vehicles. That matters because it helps focus attention on more relevant events instead of treating every motion trigger the same way. It is a useful fit when you want broader panoramic coverage but still need smarter event filtering.

Yes, it is rated IP67 for water and dust resistance. The operating conditions are listed from -30 °C to 60 °C with humidity of 95% or less, non-condensing, which supports use in demanding outdoor environments. For a buyer, that means the camera is built for rain, dust, and temperature swings that would be too harsh for many indoor-only models. The datasheet also notes that this model has no specific anti-corrosion protection, so standard outdoor use is supported, but highly corrosive environments need extra consideration.

Yes. The datasheet says the camera has a built-in memory card slot supporting microSD, microSDHC, and microSDXC cards up to 512 GB. It also supports network storage to NAS using NFS or SMB/CIFS, Auto Network Replenishment (ANR), and NVR storage. That gives you flexibility if you want edge recording in the camera, centralized storage, or both. The API section also lists ONVIF Profile S, G, and T support, which is useful for broader system compatibility planning.

Yes, it supports PoE. The datasheet lists PoE as IEEE 802.3af, Class 3, with a power range of 36 V to 57 V and maximum power consumption of 12.5 W; it also supports 12 VDC ± 25% with maximum 10.5 W. That matters because PoE can simplify installation by allowing power and data over one cable instead of separate wiring runs. For installers and buyers alike, that usually means a cleaner setup and fewer install headaches.

The camera dimensions are 118.6 mm × 105.1 mm × 305.4 mm, and the unit weight is approximately 1420 g, or 3.1 lb. With packaging, the weight is approximately 2228 g, or 4.9 lb. This is helpful when planning mounts, shipping, and making sure the chosen location can support the camera comfortably. The datasheet also lists optional mounting accessories such as vertical pole mounts, corner mounts, and junction boxes for installation flexibility.